Wax model combination (group tree)
Wax model combination Process requirements Room temperature 24℃±3℃. After welding, the minimum distance between the upper surface of the wax mold and the upper edge of the sprue cup is not less than 60mm. Wax pattern spacing after welding is 6-8mm (minimum 4mm with holes, the spacing between grooves is slightly about 10-12mm; gate length […]
What Are the Properties of Steel?
Some of the properties and characteristics associated with steel are listed below: Strength:Steel, although it varies from steel type to steel type, typically has high strength, making it an ideal material for buildings, bridges, and vehicles. Its strength can be adjusted through the addition of alloying elements and heat treatment processes. Toughness:The toughness of some […]
