Key Considerations for Hot Dip Galvanizing
Surface Preparation Cleaning: Ensure thorough removal of oil, grease, dirt, rust, and mill scale. Inadequate cleaning leads to poor zinc adhesion. Pickling: Use hydrochloric or sulfuric acid to dissolve remaining oxides. Monitor acid concentration and temperature to avoid over-pickling (pitting) or under-pickling. Fluxing: Apply a flux (typically zinc ammonium chloride) to prevent re-oxidation before immersion […]
Types of Plastic Used in CNC Machining
Not all plastics can be CNC machined. However, one thing to note is that the more rigid a plastic is, then, the easier the better machinability it has. On the contrary, the softer and more flexible the plastic, the less suitable they are for machining. In the world of machining, there are about a few […]
